Characterization of novel self-healing polymer blends for additive manufacturing
Paper published to ScholarWorks@UTEP 1 May 2023 https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4870&context=open_etd...
A PARAMETRIC OPTIMIZATION OF LATTICE STRUCTURE HEAT SINKS: AN INTEGRATED COMPUTATIONAL AND EXPERIMENTAL APPROACH
Paper published to ProQuest May 2023 https://www.proquest.com/openview/5e604752413140228a257885a4748862/1?pq-origsite=gscholar&cbl=18750&diss=y...
Copper 3D-Printed Electrodes for Ammonia Electrosynthesis via Nitrate Reduction
Paper published to ACS Publications 25 April 2023 https://pubs.acs.org/doi/10.1021/acssuschemeng.2c06851...
Copper Composites and Laser Sintering: Novel Hybridization Method for 3D Printed Electronics
Paper published to Wiley Online Library 4 April 2023 https://onlinelibrary.wiley.com/doi/10.1002/admt.202201900...
Design and Fabrication of a High-Performance Heat Exchanger Using an Optimized Three-Dimensional Surface Structure Through Additive Manufacturing
Paper published to Georgia Southern Commons Spring 2023 https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3832&context=etd...
Application of Composite Filament with the Addition of Metallic Powders in 3D Printing
“The aim of this experimental research was to 3D-print a filament based on PLA plastic...
Indirect Induction Sintering of Metal Parts Produced through Material Extrusion Additive Manufacturing
Paper published to MDPI 16 January 2023 https://www.mdpi.com/1996-1944/16/2/885...
Overview of Debinding Methods For Parts Manufactured Using Powder Material Extrusion
“Material extrusion additive manufacturing (MEAM) is a common family of additive manufacturing processes based on the selective extrusion of...
Design of bimetallic 3D-printed electrocatalysts via galvanic replacement to enhance energy conversion systems
“3D-printing (also known as additive manufacturing) has recently emerged as an appealing technology to fight...
Physical-mechanical behaviors of stainless steel plate-lattice built by material extrusion additive manufacturing
“Additive manufacturing (AM) technology has been widely adopted for the fabrication of metal lattices due to...
Investigation of the manufacturability of a copper coil for use in space components by means of the fused filament fabrication process
Paper published to Springer Nature Link 15 October 2022 https://link.springer.com/article/10.1007/s12567-022-00475-8...
Experimental Study on Metal Parts under Variable 3D Printing and Sintering Orientations Using Bronze/PLA Hybrid Filament Coupled with Fused Filament Fabrication
Paper published to MDPI 3 August 2022 https://www.mdpi.com/1996-1944/15/15/5333...
Machine Learning-Based Void Percentage Analysis of Components Fabricated with the Low-Cost Metal Material Extrusion Process
Paper published to MDPI 17 June 2022 https://thevirtualfoundry.com/wp-content/uploads/2023/03/22-06-Machine-Learning-Based-Void-Percentage-Analysis-of-Components-Fabricated-with-the-Low-Cost-Metal-Material-Extrusion-Process.pdf...
Suitability of Low-Cost Additive Manufacturing for Polymer Electrolyte Fuel Cells
Paper published to ScholarWorks@UTEP 1 May 2022 https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4468&context=open_etd...
FDM 3D-Printed 17-4 PH Stainless Steel: Its Properties, Behaviors, and Potential
/ Paper published to Minds@UW April 2022 https://minds.wisconsin.edu/handle/1793/84556...
A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding
Paper published to MDPI 28 February 2022 https://thevirtualfoundry.com/wp-content/uploads/2023/03/22-02-A-Review-on-Material-Extrusion-Additive-Manufacturing-of-Metal-and-How-It-Compares-with-Metal-Injection-Moulding-by-Chanun-Suwanpreecha.pdf...
Fully metallic copper 3D-printed electrodes via sintering for electrocatalytic biosensing
“3D printing is a very useful manufacturing method for the fabrication of electrochemical devices. Typically, accessible fused filament...
Characteristics of 3D Printable Bronze PLA-Based Filament Composites for Gaskets
Paper published to MDPI 23 August 2021 https://thevirtualfoundry.com/wp-content/uploads/2022/02/21-08-Politehnica-University-Characteristics-of-3D-Printable-Bronze-PLA-Based-Filament-Composites-for-Gaskets-by-Marcela-Sava.pdf...
Biomedical Applications of Metal 3D Printing
Paper published to Annual Reviews in 2021 https://www.annualreviews.org/content/journals/10.1146/annurev-bioeng-082020-032402...
Feasibility study of producing multi-metal parts by Fused Filament Fabrication (FFF) technique
Paper published to ScienceDirect 17 May 2021 https://thevirtualfoundry.com/wp-content/uploads/2022/02/21-07-Aalto-University-Feasibility-study-of-producing-multi-metal-parts.pdf...