Evaluating the Thermal Performance of Topology Optimized Low-Cost 3D Printed Heat Sink Made of Copper
Paper published to ProQuest May 2021 https://www.proquest.com/openview/916e1701ce3a144d4519bfde650ce60f/1?pq-origsite=gscholar&cbl=18750&diss=y...
Prediction of Dimensional Changes of Low-Cost Metal Material Extrusion Fabricated Parts Using Machine Learning Techniques
Paper published to MDPI 23 April 2021 https://thevirtualfoundry.com/wp-content/uploads/2023/03/21-04-Prediction-of-Dimensional-Changes-of-Low-Cost-Metal-Material-Extrusion-Fabricated-Parts-Using-Machine-Learning-Techniques.pdf...
Rheology scaling of spherical metal powders dispersed in thermoplastics and its correlation to the extrudability of filaments for 3D printing
Paper published to ScienceDirect 23 March 2021 https://thevirtualfoundry.com/wp-content/uploads/2023/03/21-03-Arizona-State-University-Rheology-scaling-of-spherical-metal-powders-dispersed-in-thermoplastics-and-its-correlation-to-the-extrudability-of-filaments-for-3D-printing-by-Amm-Hasib.pdf...
Fused Filament Fabrication of Metallic Components for Semi-professional and Home Use
“State-of-the-art 3D-printing with metal filaments based on the Fused Filament Fabrication (FFF) process is discussed...
Preliminary investigation into metal-material extrusion
Paper published to Springer on 14 September 2020...
Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion
Paper published to MDPI on 24 August 2020...
PRELIMINARY MECHANICAL CHARACTERIZATION OF THE LOW-COSTMETAL 3D PRINTING
Paper published August 2020...
Microstructure and Phase Analysis of 3D-Printed Components Using Bronze Metal Filament
“Typical metal 3D printing processes with powders require either a laser or electron beam as...
Metal Filament 3D Printing of SS316L- Focusing on the printing process
Paper published on 21 January 2019...
SINTERING AND CHARACTERIZATIONS OF 3D PRINTED BRONZEMETAL FILAMENT
Paper published December 2018...
Thermal conductivity of sintered copper samples prepared using 3Dprinting-compatible polymer composite filaments
Paper published to ScienceDirect on 16 October 2018...