This category is for organizing all of the research papers, whether they are PDFs or links, so that they are all in one place, organized neatly.
“Today, it is significant that the use of additive manufacturing (AM) has growing in almost every aspect of the daily life. A high number of sectors are adapting and implementing this revolutionary production technology in their domain to increase production volumes, reduce the cost of production, fabricate light weight and complex parts in a short […]
Energy Efficiency in Additive Manufacturing: Condensed Review Read More »
“Herein, we report a MOF polymer coating and in-situ growth mixed strategy to fabricate a multifunctional floating 3D printed device for simultaneous hydrocarbon and dye removal. Due to the superhydrophobic properties (water contact angle = 151o) of the upper part of the device, it was applied for the removal of oil from water, obtaining excellent separation efficiency (from 90 to 98.6 %) for
“Titanium is a biocompatible material. Applications are used in the medical world to make implants and hard tissue replacements. The technique used is usually SLM (selective laser melting). Recently introduced titanium filament for FDM technique feed, but the mechanical properties of 3D printing products with this filament are not yet known. Titanium can be made
Paper published to Advanced Functional Materials 15 January 2024 https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202310563
Paper published to IOS Press in 2022 https://ebooks.iospress.nl/doi/10.3233/ATDE220175
“Metal Fused Filament Fabrication (MFFF or MF3) is a promising additive manufacturing technique that democratizes metal production, allowing small-scale manufacturers and researchers to access advanced metal fabrication capabilities. This master thesis investigates the feasibility and optimization of Aluminum Metal Fused Filament Fabrication. The research encompasses a comprehensive analysis of the filament material, the printing process,
Towards Aluminum Metal Fused Filament Fabrication Read More »
Paper published to Webthesis in 2023 https://webthesis.biblio.polito.it/secure/27012/1/tesi.pdf
Characterization of Metal FDM process and final mechanical performances evaluation Read More »
Paper published to Carleton University Institutional Repository in 2022 https://repository.library.carleton.ca/concern/etds/mw22v6551
Solar power systems for 3D printing on lunar surface using In Situ Resources Utilization Read More »
Paper published to Semarak ILMU Publishing in 2024 https://semarakilmu.com.my/journals/index.php/applied_sciences_eng_tech/article/view/2318/2972
https://www.matec-conferences.org/articles/matecconf/pdf/2023/15/matecconf_rapdasa2023_08004.pdf
3D printing for heat transfer: characterization of additive manufactured copper Read More »
