This category is for organizing all of the research papers, whether they are PDFs or links, so that they are all in one place, organized neatly.
Paper published to ScholarWorks@UTEP 1 May 2023 https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4870&context=open_etd
Characterization of novel self-healing polymer blends for additive manufacturing Read More »
Paper published to ProQuest May 2023 https://www.proquest.com/openview/5e604752413140228a257885a4748862/1?pq-origsite=gscholar&cbl=18750&diss=y
Paper published to ACS Publications 25 April 2023 https://pubs.acs.org/doi/10.1021/acssuschemeng.2c06851
Copper 3D-Printed Electrodes for Ammonia Electrosynthesis via Nitrate Reduction Read More »
Paper published to Wiley Online Library 4 April 2023 https://onlinelibrary.wiley.com/doi/10.1002/admt.202201900
Paper published to Georgia Southern Commons Spring 2023 https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3832&context=etd
“The aim of this experimental research was to 3D-print a filament based on PLA plastic with a metallic powder. The filament contained approximately 80 – 90 % of copper powder. The base component of the filament is thermoplastic PLA, a polymer belonging to the group of aliphatic polyesters. Composites based on PLA and powders have
Application of Composite Filament with the Addition of Metallic Powders in 3D Printing Read More »
Paper published to MDPI 16 January 2023 https://www.mdpi.com/1996-1944/16/2/885
“Material extrusion additive manufacturing (MEAM) is a common family of additive manufacturing processes based on the selective extrusion of a molten material in layers to build solid geometry. One of the emerging processes within this group is powder material extrusion (PME); in theory, it is based on the very common material extrusion (per ISO/ASTM 52900) process but uses modified
Overview of Debinding Methods For Parts Manufactured Using Powder Material Extrusion Read More »
“3D-printing (also known as additive manufacturing) has recently emerged as an appealing technology to fight against the mainstream use of carbon-based fossil fuels by the large-scale, decentralized, and sustainable manufacturing of 3D-printed electrodes for energy conversion devices. Although promising strides have been made in this area, the tunability and implementation of cost-effective metal-based 3D-printed electrodes is a challenge. Herein, a straightforward
“Additive manufacturing (AM) technology has been widely adopted for the fabrication of metal lattices due to its freeform design capability over traditional manufacturing methods. However, the prevalent laser-based AM technologies possess high energy and investment consumption, and relatively low manufacturing speed, hampering their widespread adoption in building metal lattice components. In this study, an integrated approach of material extrusion AM,
