Material Selection Process for a Low-Power Magnetically Shielded Hall ThrusterDownload Published 2025 to AIAA Region...
Material Selection Process for a Low-Power Magnetically Shielded Hall Thruster
read more
Tanya Fosdal
Development and dosimetric evaluation of a modulatedintraoperative radiotherapy (mIORT) system using the Zeissintrabeam device
Development and dosimetric evaluation of a modulated intraoperative radiotherapy (mIORT) systen using the Zeiss...
Sintering Mechanisms in Metal Extrusion-based Sintering-assisted Additive Manufacturing: State-of-the-Art and Perspectives
"Extrusion-based sintering-assisted additive manufacturing (ES-AM) has enabled the fabrication of intricate metal...
Development of AF9628 Filament for Bound Metal Deposition Additive Manufacturing
"The Innovative Munitions Team’s task was to develop a cost-effective additive manufacturing (AM) method for ordnance...
Investigating the Influence of Infill Density and Postprocessing Parameters on 3D Printed PLA Copper Composite
Investigating-the-influence-of-infill-density-and-post-processing-parameters-on-3d-printed-pla-copper-compositeDownload...
A Review of Fused Filament Fabrication of Metal Parts (Metal FFF): Current Developments and Future Challenges
A Review of Fused Filament Fabrication of Metal Parts (Metal FFF) Current Developments and Future ChallengesDownload...
Thermal-fluid modeling and simulation of Ti-6Al-4V alloy filaments during shaping in the hot-end of material extrusion additive manufacturing
"Continuous progress in material extrusion additive manufacturing is motivated by the need to produce functional parts...
Geometric and hardness characterization of additively manufactured copper using bound powder extrusion with thermal sintering
Geometric and hardness characterization ofDownload Full paper published to MATEC Web of Conferences in 2024...
3d printing of a continuous carbon fiber reinforced bronze-matrix composite using material extrusion
"The main objective of this study is to investigate, for the first time, the feasibility of 3d printing a continuous...
Enhanced Phase Change Heat Transfer with Fused Deposition Modeling (FDM) Printed Pit and Pillar (Pi2) Arrays
"Phase change heat transfer, crucial in thermal management systems, can be significantly enhanced through optimized...